Volkswagen Tiguan Owners Manual: After changing a wheel

Volkswagen Tiguan Owners Manual / Do it yourself / Changing a wheel / After changing a wheel

Read and follow the introductory information and safety information first⇒Introduction to the subject

Clean the tools in the vehicle tool kit if necessary and stow them in the left storage compartment in the luggage compartment ⇒ Vehicle tool kit .

Securely store the compact spare wheel or the wheel you took off the vehicle in the luggage compartment.

Have the wheel bolt tightening torque immediately checked with a torque wrench ⇒ Wheel bolt tightening torque .

Have the damaged wheel replaced as soon as possible.

The Tire Pressure Monitoring System must be recalibrated after each tire change ⇒ Tire pressure monitoring system (TPMS) .

Changing a wheel

Fig. 196 Changing a wheel: remove previously loosened wheel bolts using the screwdriver handle. Read and follow the introductory information and safety information first⇒Introduction to the s ...

Fuses

...

See More:

Volkswagen Tiguan Service and Repair Manual > Pressures, Checking: Checking with Expansion Valve, Receiver/Dryer and A/C Compressor Regulator Valve -N280-, Externally Regulated A/C Compressor
Specified Values Note Connecting service station. Observe test requirements. Bring engine speed up to 2000 RPM. Pay attention to the A/C service station pressure gauge. Note High-pressure side: Increasing from initial pressure (when connecting pressure gauges) to 20 bar (290 psi). L ...