Volkswagen Tiguan Owners Manual: Shifting with Tiptronic®

Volkswagen Tiguan Owners Manual / While driving / Starting, shifting, parking / Shifting / Shifting with Tiptronic®

Fig. 134 Selector lever in Tiptronic position.

Read and follow the introductory information and safety information first⇒

Introduction to the subject

Tiptronic lets you upshift and downshift manually with the automatic transmission. When Tiptronic mode is used, the transmission stays in the current gear and does not upshift or downshift automatically unless the transmission senses a situation where upshifting or downshifting is necessary to keep the engine from over- or under-revving.

Using Tiptronic with the selector lever

Push the selector lever sideways to the right from Drive (D) position into the Tiptronic position ⇒ .

Briefly push the selector lever forward ⊕ to upshift into a higher gear or backward ㊀ to downshift into a lower gear ⇒ Fig. 134 .

Note

During acceleration, the transmission will shift automatically into the next higher gear before reaching maximum engine speed (rpm).

If you use Tiptronic to shift into a lower gear, the transmission will downshift only when doing so will not over-rev the engine.

Automatic transmission: Selector lever

Fig. 133 Automatic transmission selector lever with shift lever release button (arrow). Read and follow the introductory information and safety information first⇒Introduction to the subject� ...

Driving with automatic transmission

Read and follow the introductory information and safety information first⇒Introduction to the subject All forward gears shift up and down automatically. Driving on hills The steeper the grad ...

See More:

Volkswagen Tiguan Service and Repair Manual > Refrigerant Circuit General Information: Refrigerant Circuit Components
Refrigerant Circuit Component Arrangement Caution Non-approved tools or materials such as leak sealing additives can cause damage or malfunctions in the system. Only use tools and materials approved by the manufacturer. The warranty is voided if non-approved tools or materials are used. All compo ...