Volkswagen Tiguan Owners Manual: Changing the light bulb in the license plate lamp

Volkswagen Tiguan Owners Manual / Do it yourself / Changing light bulbs / Changing the light bulb in the license plate lamp

Fig. 209 In the rear hatch: Clamped license plate lamp.

Fig. 210 In the rear hatch: Screwed license plate lamp.

Read and follow the introductory information and safety information first⇒

Introduction to the subject

Please carry out each step only in the order specified:
	Clamped license plate lamp	Screwed license plate lamp
1.	Please review and follow the checklist ⇒ Information on light bulb replacement .
2.	Press the flat blade of the screwdriver from the vehicle tool kit in the direction of the arrow in the notch in the license plate lamp ⇒ Fig. 209 .	Remove the screws of the license plate lamp with the screwdriver from the vehicle tool kit.
3.	Pull out the license plate lamp slightly. The connector must not be separated for this.
4.	Replace the burned out light bulb with a new bulb of the same type.
5.	Carefully insert the license plate lamp into the opening in the bumper. Ensure that the license plate lamp is installed in the correct direction.	Carefully insert the license plate lamp into the opening in the bumper. Make sure that the adhesive anti-glare strip faces forward.
6.	Press the license plate lamp into the bumper until it audibly latches.	Tighten the securing screws of the license plate lamp with the screwdriver.

Changing taillight bulbs in the vehicle body

Fig. 207 In the side of the luggage compartment: releasing the tail light, removing the trim panel and removing the screws. Fig. 208 Removed tail light: removing the bulb holder and replacing t ...

Changing the light bulb in the backup lamp

Read and follow the introductory information and safety information first⇒Introduction to the subject The light bulbs for the backup lights are Lifetime bulbs with a very long service life. ...

See More:

Volkswagen Tiguan Service and Repair Manual > Body front: Lock Carrier
Tools Required Special Tools and Equipment Special tools and workshop equipment required Guide Pins -T10093 Torque Wrench 1331 5-50Nm -VAG1331- Torque Wrench 1332 40-200Nm -VAG1332 Overview - Lock Carrier Lock Carrier with Attachments Removing and installing Service position Screw ...