Fig. 199 Illustration of a blown fuse.
Fig. 200 Removing or inserting a fuse using the plastic tweezers.
Read and follow the introductory information and safety information first⇒Introduction to the subjectPreparations
Identifying blown fuses
A blown fuse can be recognized by the burned metal strip ⇒ Fig. 199 .
Shine a flashlight on the fuse. This makes it easier to tell if the fuse has blown.
Replacing the fuse
Note
If a fuse is replaced with a fuse with higher amperage, then damage can occur at various places in the electrical system.Volkswagen Tiguan Service and Repair Manual > Subframe, Stabilizer Bar and Control Arms: Subframe with Steering Gear, Removing and Installing
Special tools and workshop equipment required
Puller - Ball Joint -3287A-
Torque Wrench 1332 40-200Nm -VAG1332-
Removing
Turn the steering wheel in the straight position and remove the ignition
key so that the steering wheel lock engages.
Vehicles with "Keyless Access" Keyless Locking and S ...