Volkswagen Tiguan Owners Manual: Wheel bolt caps
Fig. 191 Pulling cover caps off wheel bolts.
Read and follow the introductory information and
safety information first⇒
Introduction
to the subject - Take the wire clip out of the vehicle tool kit ⇒ Vehicle tool kit .
- Insert the wire clip through the opening of the cover cap ⇒ Fig. 191 and pull off in the direction of the arrow.
The caps are designed to protect the wheel bolts and should be installed again after the wheel change.
The anti-theft wheel bolt has a separate cap. This only fits the anti-theft wheel bolt, but not the standard wheel bolts.
Wheel cover
Fig. 190 Pulling the wheel cover off.
Read and follow the introductory information and
safety information first⇒Introduction
to the subject Pulling off the wheel cover
Take the lug wrench ...
Changing a wheel
...
See More:
Volkswagen Tiguan Service and Repair Manual > Hydraulic Components: Brake Lines
Separating Point, Underbody
Old Connection
Pipe fitting, 14 Nm
Distribution piece, counterhold while tightening.
New Connection
Pipe fitting, 14 Nm
Ring
Flare F
Flare E, not flareable
Nut, counterhold when tightening
Brake Lines, Repairing
Flare the brake lines with 5 mm outer diameter ...
Volkswagen Tiguan Owners Manual
Volkswagen Tiguan Service and Repair Manual
- Body exterior
- Body Interior
- General Paint Information
- Paint
- Brake System
- Suspension, Wheels, Steering
- Wheel and Tire Guide
- Towing Guide
- Wheel and Tire Guide General Information
- Communication
- Electrical Equipment General Information
- Electrical Equipment from 06/2011
- Heating, Ventilation and Air Conditioning
- Refrigerant R134a Servicing
- 6-Speed Manual Transmission 02Q, OBB, and OFB
© 2018-2026 Copyright www.vwtiguan.org - 0.0871