Read and follow the introductory information and
safety information first⇒
Introduction
to the subject
| Please perform these steps only in the order listed. | ||
|---|---|---|
| Vehicles without Keyless Access | Vehicles with Keyless Access | |
| 1. | Bring the vehicle to a complete stop ⇒ . |
|
| 2. | Depress and hold down the brake pedal until step 4 is completed. | |
| 3. | Automatic transmission: Shift the transmission into Park (P). | |
| 4. | Apply the electronic parking brake to help prevent the vehicle from moving ⇒ Braking, stopping, and parking . | |
| 5. | Turn the remote control vehicle key to position ⇒ Fig. 127⓪ in the ignition switch. | Briefly press the starter button ⇒ Fig. 128 . If the engine will not switch off, carry out the emergency shutoff procedure ⇒ Starter button . |
| 6. | With a manual transmission, shift into 1st gear (vehicle on flat surface or pointing uphill) or reverse (vehicle pointing downhill). | |
| 7. | Removing the vehicle key from the ignition switches off electrical equipment and activates the steering column lock. | Opening the doors switches off electrical equipment and activates the steering column lock. |

Warning

Note



Applicable only in Canada
Starting the engine
Stopping the engineVolkswagen Tiguan Service and Repair Manual > Subframe, Stabilizer Bar and Control Arms: Subframe, Securing
Special tools and workshop equipment required
Locating Pins -T10096-
Engine and Gearbox Jack -VAS6931-
Locating Pins -T10096-, Installing
To secure the subframe, the Locating Pins -T10096- must be installed in
positions -1, 2, 3 and 4-, one after the other.
Note
Locating Pins -T10096- may only ...