
Fig. 74 Keep unused safety belts away from children in child safety seats.
Read and follow the introductory information and 
safety information first⇒
Introduction 
to the subject Important special steps when installing a child restraint with LATCH/UCRA lower universal anchorages or with the vehicle safety belt.
You must take special precautions when installing a child restraint with the vehicle safety belt or with LATCH/UCRA lower universal anchorages behind the front passenger seat or behind the driver seat. Always route the unused center seat safety belt and the unused safety belt for the seating position where the LATCH/UCRA child restraint is being installed around the rear head restraint behind the child restraint to help prevent a child from playing with the unused belt and becoming entangled in it ⇒ Fig. 74 .
When a child safety seat is secured on the rear bench, adjust the position of 
the front seat to provide the child with sufficient space. Therefore, adjust the 
front seat to the size of the child safety seat and the child. Consider the proper 
seating position of the passenger 
⇒ Adjusting the seating 
position .
Secure unused safety belts on the rear seat!
If a child safety seat is used on the rear bench, especially with LATCH/UCRA 
universal anchorages, the unused safety belts must be secured so 
that the child in the child restraint cannot reach them ⇒
 .

Warning

Note
Important safety instructions for using child seats
Infant seatsVolkswagen Tiguan Service and Repair Manual > Drive Axles, Removing and Installing: Twelve-Point Bolt with Ribs, Loosening and Tightening, Drive Axle Threaded
   Special tools and workshop equipment required
	Socket AF 24 mm -T10361A-
	Digital Torque Wrench -VAG1756A-
Difference between A Twelve-Point Bolt with Ribs and A Twelve-Point Bolt 
without Ribs
The contact surfaces -arrow A- and
-arrow B- are different on the two-point bolts.
	Twelve-point bolt w ...