Volkswagen Tiguan Service and Repair Manual: Gears, Shafts

Special Tools

Special tools and workshop equipment required Bearing Driver - Multiple Use -VW244B- Transmission Support -VW353- Press Plate -VW401- Press Plate -VW402- Press Piece - Rod -VW407- Press Piece ...

Input Shaft

Overview - Input Shaft Note Warm the toothed gear to approximately 100 ºC (212 ºF) using Inductive Heater -VAS6414-. Wear protective gloves. Install all input shaft bearings with transmission f ...

See More:

Volkswagen Tiguan Service and Repair Manual > Seat Frames: Passenger Seat with Pass-Through
Sill-Side Trim Panel, Removing and Installing Removing Remove the cover -1- and remove the release lever -2-. Pull the height adjustment handle -1- upward. Using a small screwdriver, push the metal tab on the clamp -2- located on the inside of the height adjustment handle, toward the s ...