Before any work in the engine compartment, carry out the following
steps in the order in which they are listed ⇒
:

Park the vehicle in a safe place on a firm, level surface.

Hold the brake pedal down until the engine is switched off.

Apply the electronic parking brake to help prevent the vehicle from moving Braking, stopping, and parking.

Shift the transmission into Park (P) (automatic) or Neutral (manual only) Shifting.

Stop the engine and remove the key from the ignition switch Starting and stopping the engine.

Let the engine cool down sufficiently.

Keep children and others away from the vehicle.

Make sure the vehicle cannot move unexpectedly.

Warning
Getting ready to work in the engine compartment
Opening and closing the engine compartmentVolkswagen Tiguan Service and Repair Manual > Drive Axles, Removing and Installing: Drive Axles with Triple Roller Joint AAR3300i, Mounted in Transmission,
Removing and Installing
Special tools and workshop equipment required
Drive Axle Wedge Tool -T10161-
Drive Shaft Remover -T10520-
Torque Wrench 1332 40-200Nm -VAG1332-
Caution
When disassembling and performing repairs on a vehicle, the drive axles must
not hang down loosely and contact the stops in the joint by over ...