Volkswagen Tiguan Owners Manual: Windshield wiper functions

Volkswagen Tiguan Owners Manual / Before driving / Lights and vision / Windshield wiper and washer / Windshield wiper functions

Read and follow the introductory information and safety information first⇒Introduction to the subject

Wiper performance in different situations:
When the vehicle is not moving:	The wiper speed changes temporarily to the next lower speed.
During automatic wipe/wash:	While the washer system is working, the Climatronic switches to recirculation for about 30 seconds to help prevent the washer fluid odor from entering the vehicle interior.
During intermittent wiping:	Speed-dependent interval control: The higher the vehicle speed, the faster the wipers move.

Heated washer nozzles

The heating thaws frozen water nozzles, but not the fluid supply hoses. When the ignition is switched on, the heat applied to the washer nozzles is automatically regulated depending on the outside air temperature.

If there is something on the windshield, the wiper will try to wipe it away. If it continues to block the wiper, the wiper will stop moving. Remove the obstacle and switch the wiper on again.

Windshield wiper lever

Fig. 86 Operating the front windshield wiper. Fig. 87 Operating the rear wiper. Read and follow the introductory information and safety information first⇒Introduction to the subject ...

Windshield wiper service position

Fig. 88 Windshield wiper in service position. Read and follow the introductory information and safety information first⇒Introduction to the subject Service position In the service position ...

See More:

Volkswagen Tiguan Service and Repair Manual > Output Shaft: Overview - Output Shaft
Overview - Output Shaft, 1st to 4th Gears Note Warm the bearing inner race/tapered roller bearing and synchronizer hub to approximately 100 ºC (212 ºF) using Inductive Heater -VAS6414-. Wear protective gloves. Install a collar bushing instead of thrust washers -item 19- and retaining ring ...